🎒 SchoolNEW 💡 Suggest

Pulley, sprocket and multi-stage total ratio

Pulley ratio (d2/d1) and sprocket ratio (z2/z1), output speed, and the total ratio of a gearmotor plus downstream drive or several stages in series. Pulleys: i = d2 / d1 (no slip). The calculator is free and shows the formula, the working and a numerical example, with no sign-up.

Results

Indicative results: always verify with a qualified technician and the applicable standards. Legal notice

Step-by-step calculation with your values

    Formulas

    Pulleys

    i = \frac{d_2}{d_1}
    n_2 = \frac{n_1}{i}

    How it is calculated

    Pulleys: i = d2 / d1 (no slip). Chain: i = z2 / z1. Drives in series multiply: i_tot = i1·i2·i3, and the final speed is n1 / i_tot. Example: a gearmotor with i = 20 plus a 15/45 chain (i = 3) gives i_tot = 60. Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.

    Results are indicative: for real projects and installations always check applicable standards and a qualified professional.

    Example (Pulleys)

    With the values: Driving pulley diameter d1 = 100 mm; Driven pulley diameter d2 = 250 mm; Motor speed n1 = 1,400 rpm — you get:

    • Reduction ratio i: 2.5
    • Output speed n2: 560 rpm

    Frequently asked questions

    Which formula does the “Pulley, sprocket and multi-stage total ratio” calculator use?

    Pulleys: i = d2 / d1 (no slip). Chain: i = z2 / z1. Drives in series multiply: i_tot = i1·i2·i3, and the final speed is n1 / i_tot. Example: a gearmotor with i = 20 plus a 15/45 chain (i = 3) gives i_tot = 60. Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.

    Is FunConvert free?

    Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.

    What do you think?

    Your rating