Motor rpm from poles and frequency, VFD Hz ↔ rpm
Synchronous speed n = 120·f/p, actual rpm with slip, and VFD Hz ↔ rpm conversion for induction motors and gearmotors. An induction motor's field turns at ns = 120·f / p (p = number of poles): at 50 Hz 2 poles = 3000, 4 poles = 1500, 6 poles = 1000 rpm. The calculator is free and shows the formula, the working and a numerical example, with no sign-up.
Results
Indicative results: always verify with a qualified technician and the applicable standards. Legal notice
Step-by-step calculation with your values
Formulas
From poles and frequency
n_s = \frac{120 \cdot f}{p}n = n_s \cdot \left(1 - \frac{s}{100}\right)Inverter: Hz → rpm
\Delta n = \frac{120 \cdot f_n}{p} - n_nn = \frac{120 \cdot f}{p} - \Delta nn_2 = \frac{n}{i}Inverter: rpm → Hz
\Delta n = \frac{120 \cdot f_n}{p} - n_nf = \frac{(n + \Delta n) \cdot p}{120}How it is calculated
An induction motor's field turns at ns = 120·f / p (p = number of poles): at 50 Hz 2 poles = 3000, 4 poles = 1500, 6 poles = 1000 rpm. The rotor runs slightly slower because of slip (2–6 %). With a VFD the slip in rpm is assumed roughly constant at constant torque: n = 120·f/p − (ns,rated − n,rated). Above rated frequency the motor runs at constant power and torque drops. Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.
Results are indicative: for real projects and installations always check applicable standards and a qualified professional.
Example (From poles and frequency)
With the values: Frequency = 50 Hz; Number of poles p (2, 4, 6, 8…) = 4; Slip s = 3.3 % — you get:
- Synchronous speed ns: 1,500 rpm
- Actual motor speed: 1,450.5 rpm
Frequently asked questions
Which formula does the “Motor rpm from poles and frequency, VFD Hz ↔ rpm” calculator use?
An induction motor's field turns at ns = 120·f / p (p = number of poles): at 50 Hz 2 poles = 3000, 4 poles = 1500, 6 poles = 1000 rpm. The rotor runs slightly slower because of slip (2–6 %). With a VFD the slip in rpm is assumed roughly constant at constant torque: n = 120·f/p − (ns,rated − n,rated). Above rated frequency the motor runs at constant power and torque drops. Indicative values: the gearmotor manufacturer's data and instructions apply for the final selection.
Is FunConvert free?
Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.