🎒 SchoolNEW 💡 Suggest

Pressure

Convert bar to psi (pound per square inch) (bar to psi: 1 bar = 14.50377 psi) and other pressure units. You can also convert bar (bar) to kilopascal (kPa), standard atmosphere (atm) to bar (bar). Available units include dyn/cm², Pa, hPa, mbar, kPa, bar, MPa, GPa, N/mm², atm. The converter is free, with the formula and a table of common values.

1 bar = 14.50377 psi

Indicative results: always verify with a qualified technician and the applicable standards. Legal notice

Shortcuts: S swap · C copy · / value · F favourite

The value in all units

How it is calculated

Each unit is first converted to the SI reference unit (Pa) and then to the target unit. Factors follow official SI/NIST definitions.

Quick conversion table: bar → psi (pound per square inch)

1 bar14.50377psi
2 bar29.00755psi
5 bar72.51887psi
10 bar145.0377psi
20 bar290.0755psi
50 bar725.1887psi
100 bar1,450.377psi
1,000 bar14,503.77psi
1 psi0.06894757bar
2 psi0.1378951bar
5 psi0.3447379bar
10 psi0.6894757bar
20 psi1.378951bar
50 psi3.447379bar
100 psi6.894757bar
1,000 psi68.94757bar

1 bar =

1 bar1,000,000dyn/cm² (dyne per cm² (barye))
1 bar100,000Pa (pascal)
1 bar1,000hPa (hectopascal)
1 bar1,000mbar (millibar)
1 bar100kPa (kilopascal)
1 bar0.1MPa (megapascal)
1 bar0.0001GPa (gigapascal)
1 bar0.1N/mm² (newton per mm²)
1 bar0.9869233atm (standard atmosphere)
1 bar1.019716at (technical atmosphere (kgf/cm²))
1 bar10,197.16kgf/m² (kilogram-force per m²)
1 bar0.01019716kgf/mm² (kilogram-force per mm²)
1 bar14.50377psi (psi (pound per square inch))
1 bar2,088.543psf (pound-force per square foot)
1 bar0.01450377ksi (ksi)
1 bar750.0616mmHg (millimetre of mercury)
1 bar75.00616cmHg (centimetre of mercury)
1 bar750.0617Torr (torr)
1 bar29.52998inHg (inch of mercury)
1 bar10,197.16mmH₂O (millimetre of water)
1 bar1,019.716cmH₂O (centimetre of water)
1 bar10.19716mH₂O (metre of water)
1 bar401.4631inH₂O (inch of water (conventional))
1 bar33.45526ftH₂O (foot of water (conventional))

Frequently asked questions

How do I convert bar to psi (pound per square inch)?

1 bar equals 14.50377 psi (convert bar to psi (pound per square inch)). The converter first takes the value to the SI reference unit (Pa) and then to the target unit, using official SI/NIST factors.

Which pressure units can I convert?

You can convert dyn/cm², Pa, hPa, mbar, kPa, bar, MPa, GPa, N/mm², atm, at, kgf/m², kgf/mm², psi and the other units listed in the table on this page.

Is FunConvert free?

Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.

What do you think?

Your rating