Electrical conductivity (S/m, µS/cm, %IACS)
Convert microsiemens per centimetre (water) to millisiemens per metre (µS/cm to mS/m: 1 µS/cm = 0.1 mS/m) and other electrical conductivity (S/m, µS/cm, %IACS) units. You can also convert megasiemens per metre (MS/m) to % IACS (annealed copper = 100 %) (%IACS), siemens metre per mm² (m/Ω·mm²) (S·m/mm²) to megasiemens per metre (MS/m). Available units include µS/m, mS/m, µS/cm, mS/cm, S/m, ℧/m, S/cm, %IACS, MS/m, S·m/mm². The converter is free, with the formula and a table of common values.
Indicative results: always verify with a qualified technician and the applicable standards. Legal notice
Shortcuts: S swap · C copy · / value · F favourite
The value in all units
What it measures
Conductivity σ is the inverse of resistivity (σ = 1/ρ), measured in siemens per metre. Water uses µS/cm (tap water ≈ 200–800 µS/cm); metals use MS/m or %IACS: reference annealed copper is 58 MS/m = 100 %IACS (IEC 60028).
How it is calculated
Each unit is first converted to the SI reference unit (S/m) and then to the target unit. Factors follow official SI/NIST definitions.
Quick conversion table: microsiemens per centimetre (water) → millisiemens per metre
| 1 µS/cm | 0.1 | mS/m |
| 2 µS/cm | 0.2 | mS/m |
| 5 µS/cm | 0.5 | mS/m |
| 10 µS/cm | 1 | mS/m |
| 20 µS/cm | 2 | mS/m |
| 50 µS/cm | 5 | mS/m |
| 100 µS/cm | 10 | mS/m |
| 1,000 µS/cm | 100 | mS/m |
| 1 mS/m | 10 | µS/cm |
| 2 mS/m | 20 | µS/cm |
| 5 mS/m | 50 | µS/cm |
| 10 mS/m | 100 | µS/cm |
| 20 mS/m | 200 | µS/cm |
| 50 mS/m | 500 | µS/cm |
| 100 mS/m | 1,000 | µS/cm |
| 1,000 mS/m | 10,000 | µS/cm |
1 microsiemens per centimetre (water) =
| 1 µS/cm | 100 | µS/m (microsiemens per metre) |
| 1 µS/cm | 0.1 | mS/m (millisiemens per metre) |
| 1 µS/cm | 0.001 | mS/cm (millisiemens per centimetre) |
| 1 µS/cm | 0.0001 | S/m (siemens per metre) |
| 1 µS/cm | 0.0001 | ℧/m (mho per metre) |
| 1 µS/cm | 0.000001 | S/cm (siemens per centimetre) |
| 1 µS/cm | 1.72414 × 10^-10 | %IACS (% IACS (annealed copper = 100 %)) |
| 1 µS/cm | 1 × 10^-10 | MS/m (megasiemens per metre) |
| 1 µS/cm | 1 × 10^-10 | S·m/mm² (siemens metre per mm² (m/Ω·mm²)) |
Frequently asked questions
Electrical conductivity (S/m, µS/cm, %IACS): what does it measure?
Conductivity σ is the inverse of resistivity (σ = 1/ρ), measured in siemens per metre. Water uses µS/cm (tap water ≈ 200–800 µS/cm); metals use MS/m or %IACS: reference annealed copper is 58 MS/m = 100 %IACS (IEC 60028).
How do I convert microsiemens per centimetre (water) to millisiemens per metre?
1 µS/cm equals 0.1 mS/m (convert microsiemens per centimetre (water) to millisiemens per metre). The converter first takes the value to the SI reference unit (S/m) and then to the target unit, using official SI/NIST factors.
Which electrical conductivity (S/m, µS/cm, %IACS) units can I convert?
You can convert µS/m, mS/m, µS/cm, mS/cm, S/m, ℧/m, S/cm, %IACS, MS/m, S·m/mm² and the other units listed in the table on this page.
Is FunConvert free?
Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.