Surface tension
Convert dyne per centimetre to millinewton per metre (dyn/cm to mN/m: 1 dyn/cm = 1 mN/m) and other surface tension units. You can also convert millinewton per metre (mN/m) to newton per metre (N/m). Available units include dyn/cm, erg/cm², mN/m, N/m, gf/cm, kgf/m, lbf/ft, lbf/in. The converter is free, with the formula and a table of common values.
Indicative results: always verify with a qualified technician and the applicable standards. Legal notice
Shortcuts: S swap · C copy · / value · F favourite
The value in all units
What it measures
Surface tension γ is the force per unit length along a liquid surface (N/m). Water at 20 °C is about 72.8 mN/m; 1 dyn/cm = 1 mN/m. It matters for inks, glues, coating and labelling.
How it is calculated
Each unit is first converted to the SI reference unit (N/m) and then to the target unit. Factors follow official SI/NIST definitions.
Quick conversion table: dyne per centimetre → millinewton per metre
| 1 dyn/cm | 1 | mN/m |
| 2 dyn/cm | 2 | mN/m |
| 5 dyn/cm | 5 | mN/m |
| 10 dyn/cm | 10 | mN/m |
| 20 dyn/cm | 20 | mN/m |
| 50 dyn/cm | 50 | mN/m |
| 100 dyn/cm | 100 | mN/m |
| 1,000 dyn/cm | 1,000 | mN/m |
| 1 mN/m | 1 | dyn/cm |
| 2 mN/m | 2 | dyn/cm |
| 5 mN/m | 5 | dyn/cm |
| 10 mN/m | 10 | dyn/cm |
| 20 mN/m | 20 | dyn/cm |
| 50 mN/m | 50 | dyn/cm |
| 100 mN/m | 100 | dyn/cm |
| 1,000 mN/m | 1,000 | dyn/cm |
1 dyne per centimetre =
| 1 dyn/cm | 1 | erg/cm² (erg per cm²) |
| 1 dyn/cm | 1 | mN/m (millinewton per metre) |
| 1 dyn/cm | 0.001 | N/m (newton per metre) |
| 1 dyn/cm | 0.001019716 | gf/cm (gram-force per centimetre) |
| 1 dyn/cm | 0.0001019716 | kgf/m (kilogram-force per metre) |
| 1 dyn/cm | 0.0000685218 | lbf/ft (pound-force per foot) |
| 1 dyn/cm | 0.0000057101 | lbf/in (pound-force per inch) |
Frequently asked questions
Surface tension: what does it measure?
Surface tension γ is the force per unit length along a liquid surface (N/m). Water at 20 °C is about 72.8 mN/m; 1 dyn/cm = 1 mN/m. It matters for inks, glues, coating and labelling.
How do I convert dyne per centimetre to millinewton per metre?
1 dyn/cm equals 1 mN/m (convert dyne per centimetre to millinewton per metre). The converter first takes the value to the SI reference unit (N/m) and then to the target unit, using official SI/NIST factors.
Which surface tension units can I convert?
You can convert dyn/cm, erg/cm², mN/m, N/m, gf/cm, kgf/m, lbf/ft, lbf/in and the other units listed in the table on this page.
Is FunConvert free?
Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.