Pulley & block and tackle calculator
Pick the rig and the load: see at once how much pull you need, how much rope you must haul and what each rope part carries. Drag the rope in the drawing to watch the load rise.
0.95 ball bearings · 0.90 plain bushings · 0.98 high-quality roller bearings · 1 ideal
Indicative calculation, not a certification of lifting equipment. Follow EN 13157 (hand-powered) and EN 14492 (power-driven winches and hoists), the manufacturer's data, the working load limit (WLL) and safety factors; have the setup checked by a competent person.
How it is calculated
- Single fixed pulley
- Single movable pulley
- Block and tackle with N parts
- Compound tackle (Spanish burton, 3:1)
- Movable pulleys in series (2ᵏ)
- Differential pulley (Weston)
Golden rule of mechanics: what you gain in force you pay in rope length. The work never gets smaller.
Each sheave the rope passes reduces the tension by the factor η = 0.95 (from the hauling part towards the dead end). When lowering the load drives, so 1/η replaces η.
If you pull down, the top hook carries the load plus your pull; if you pull up, your pull relieves it. Block and rope weights not included.
Frequently asked questions
How much pull does a 4-part block and tackle need?
Without friction, a quarter of the weight: for 100 kg that is 980.7 N / 4 = 245.2 N (25 kgf). With ball-bearing sheaves (η = 0.95) and the hauling part off the fixed block you need about 278 N, because the rope passes 4 sheaves.
How do you count the parts of a tackle?
Count the rope parts at the moving block (the one on the load). If the dead end is tied to the moving block the number is odd, if it is on the fixed block it is even. The hauling part only counts if you pull upwards from the moving block.
Why do more pulleys mean more rope to pull?
Work (force × distance) cannot be created: with an advantage of 4 the pull is a quarter, but to raise the load 1 m you must pull 4 m of rope. Friction always adds a little extra work.
What force does the top hook feel?
If you pull downwards, the load plus your pull (with 100 kg on 4 parts about 1,259 N, i.e. 128 kgf). Add the weight of blocks and rope and the safety factor required by the standard.
Is this calculation a safety check?
No, it is indicative. Lifting is governed by EN 13157 and EN 14492, the manufacturer's data, the working load limit and periodic inspections.