🎒 SchoolNEW 💡 Suggest

Hydraulic / pneumatic cylinder force

Calculate push and pull force of a hydraulic or pneumatic cylinder from pressure, bore and rod diameter. Force = pressure × area. The calculator is free and shows the formula, the working and a numerical example, with no sign-up.

Results

Indicative results: always verify with a qualified technician and the applicable standards. Legal notice

Step-by-step calculation with your values

    Formulas

    A_1 = \frac{\pi D^2}{4}
    A_2 = \frac{\pi (D^2 - d^2)}{4}
    F_1 = \frac{p \cdot A_1}{100}
    F_2 = \frac{p \cdot A_2}{100}

    How it is calculated

    Force = pressure × area. Pushing uses the piston area π·D²/4, pulling the annular area π·(D² − d²)/4. With p in bar and A in cm², F[kN] = p·A / 100. Friction reduces actual force by 5–10 %.

    Results are indicative: for real projects and installations always check applicable standards and a qualified professional.

    Example

    With the values: Pressure = 160 bar; Piston (bore) diameter D = 63 mm; Rod diameter d = 36 mm — you get:

    • Piston-side area: 31.172 cm²
    • Rod-side (annular) area: 20.994 cm²
    • Push force: 49.876 kN
    • Pull force: 33.59 kN

    Frequently asked questions

    Which formula does the “Hydraulic / pneumatic cylinder force” calculator use?

    Force = pressure × area. Pushing uses the piston area π·D²/4, pulling the annular area π·(D² − d²)/4. With p in bar and A in cm², F[kN] = p·A / 100. Friction reduces actual force by 5–10 %.

    Is FunConvert free?

    Yes. Every converter and calculator is free, with no sign-up and nothing to install. Calculations run in your browser.

    What do you think?

    Your rating